Vents KSK 150 4E kitchen extractor fan
In Stock
| Delivery Method | Delivery Time | Cost | |
|---|---|---|---|
|
Nova poshta
To a branch or by courier
|
1-5 days | According to the carrier's rates |
|
Pickup
From pickup points
|
1 day | Free of charge |
The warranty for electrical components and motors is *90 days upon presentation of a document confirming the purchase of the product.
The warranty for other spare parts is 14 days.
| Manufacturer | Vents |
| Brand | Vents |
| Country of manufacture | Ukraine |
| Rated power, W | 180 |
| Current consumption, A | 1,7 |
| Supply voltage, V | 230 |
| Power frequency, Hz | 50 |
| Rotation frequency, RPM | 1450 |
| Air consumption, m3/h | 700 |
| Sound pressure level, dB(A) | 41 |
| Mass, kg | 17 |
| Protection, IP | IP54 |
| Temperature of the moving air, Degrees Celsius | -20...+100 |
| State | New |
| Warranty period, months | 24 |
The Vents KSK 150 4E kitchen fan is designed to remove hot air containing grease from kitchen ventilation exhaust systems and ovens in Hosper restaurants, canteens, cafes and other catering facilities, bakeries, confectionery shops, and so on. The fan is capable of removing air with a temperature of up to 100°C with a maximum capacity of 700 m3/h.
The motor-impeller unit, which can be folded down on hinges, provides easy access to the interior of the fan for quick and easy cleaning.
Overall dimensions
Diagram
Design
To insulate against noise and heat loss, the Vents KSK 150 4E fan housing is made of galvanized steel using 50 mm thick mineral wool. For ease of maintenance and cleaning of the fan, the motor-impeller unit folds down on hinges.
A rubber seal is provided on the fan flanges for a hermetic connection with the air ducts. The mounting frame is equipped with vibration dampers.
Motor
The fans of this series use a single-phase (model E) or three-phase motor (model D) with a squirrel-cage rotor and a steel high-performance centrifugal impeller with forward-curved blades. The motor does not require maintenance and is equipped with built-in thermal contacts with terminals for connecting to an external overheating protection device. Motor insulation class F. Protection type IP 54.
Speed regulation
It is allowed to use smooth or step-by-step regulation of the fan performance. To do this, you need to use a frequency regulator or autotransformer. It is allowed to connect several fans to one regulating device, provided that the total power consumption and operating current do not exceed the nominal parameters of the regulator.
The Vents RS-1-400 regulator is suitable for this model (purchased separately).
Installation
The kitchen fan is designed for connection to round air ducts. The fan is mounted on the wall using brackets. The connection to the electrical network is carried out using a terminal box installed on the electric motor. The length of the electric cable must be selected with a margin, taking into account the tilting of the motor-impeller unit. It is recommended to install flexible inserts before and after the fan. When installing the fan, it is necessary to provide a straight section of the air duct with a length of at least one diameter of the air duct on the inlet side and at least three diameters on the air outlet side.
In Stock
In Stock