Vents KSK 200 4D kitchen extractor fan
In Stock
| Delivery Method | Delivery Time | Cost | |
|---|---|---|---|
|
Nova poshta
To a branch or by courier
|
1-5 days | According to the carrier's rates |
|
Pickup
From pickup points
|
1 day | Free of charge |
The warranty for electrical components and motors is *90 days upon presentation of a document confirming the purchase of the product.
The warranty for other spare parts is 14 days.
| Manufacturer | Vents |
| Brand | Vents |
| Country of manufacture | Ukraine |
| Rated power, W | 750 |
| Current consumption, A | 2 |
| Supply voltage, V | 380 |
| Power frequency, Hz | 50 |
| Rotation frequency, RPM | 1465 |
| Air consumption, m3/h | 1650 |
| Sound pressure level, dB(A) | 45 |
| Mass, kg | 25 |
| Protection, IP | IP54 |
| Temperature of the moving air, Degrees Celsius | -20...+100 |
| State | New |
| Warranty period, months | 24 |
The Vents KSK 200 4D kitchen fan is designed to remove hot air containing fat (temperature up to 100°C) from the exhaust ventilation systems of kitchens of restaurants, canteens and other similar premises. The fan is easy to maintain, with a hinged motor-impeller unit for quick and easy cleaning. This fan is equipped with a three-phase motor.
Overall dimensions
Diagram
Design
For noise and heat loss insulation, the Vents fan housing KSK 200 4D is made of galvanized steel using 50 mm thick mineral wool. For ease of maintenance and cleaning of the fan, the motor-impeller unit is hinged.
A rubber seal is provided on the fan flanges for a hermetic connection with the air ducts. The mounting frame is made with vibration dampers.
Motor
The fan uses a single-phase (model E) or three-phase motor (model D) with a squirrel-cage rotor and a steel high-performance centrifugal impeller with forward-curved blades. The motor is maintenance-free and equipped with built-in thermal contacts with terminals for connecting to an external overheating protection device. Motor winding insulation class F. Protection type IP 54.
Speed regulation
It is allowed to use smooth or step-by-step regulation of the fan performance. For this, it is necessary to use a frequency regulator or autotransformer. It is allowed to connect several fans to one regulating device, provided that the total power consumption and operating current do not exceed the nominal parameters of the regulator.
The Vents RSA5D-3,5-T regulator is suitable for this model (purchased separately).
Installation
The kitchen fan is designed for connection to round air ducts. The fan is mounted on the wall using brackets. Connection to the electrical network is carried out using a terminal box installed on the electric motor. The length of the electric cable must be selected with a margin, taking into account the tilting of the impeller motor unit. It is recommended to install flexible inserts before and after the fan. When installing the fan, it is necessary to provide a straight section of the air duct with a length of at least one diameter of the air duct on the inlet side and at least three diameters on the air outlet side.
In Stock
In Stock
In Stock
In Stock
In Stock