Vents KSK 200 4E kitchen extractor fan
In Stock
| Delivery Method | Delivery Time | Cost | |
|---|---|---|---|
|
Nova poshta
To a branch or by courier
|
1-5 days | According to the carrier's rates |
|
Pickup
From pickup points
|
1 day | Free of charge |
The warranty for electrical components and motors is *90 days upon presentation of a document confirming the purchase of the product.
The warranty for other spare parts is 14 days.
| Manufacturer | Vents |
| Brand | Vents |
| Country of manufacture | Ukraine |
| Current consumption, A | 3 |
| Supply voltage, V | 380 |
| Power frequency, Hz | 50 |
| Rotation frequency, RPM | 1475 |
| Air consumption, m3/h | 1600 |
| Sound pressure level, dB(A) | 45 |
| Mass, kg | 25 |
| Protection, IP | IP54 |
| Temperature of the moving air, Degrees Celsius | -20...+100 |
| State | New |
| Warranty period, months | 24 |
The Vents KSK 200 4E kitchen fan is designed to move hot air, which may contain fat with a temperature of up to 100°C. Most often, such fans are used in exhaust ventilation systems of restaurant kitchens, dining rooms and other similar premises. Such a fan is also used for ventilation from the Josper oven. Connects to an exhaust duct with a diameter of 200 mm.
Overall dimensions
Diagram
Design
To insulate against noise and heat loss, the Vents KSK 200 4E fan housing is made of galvanized steel using 50 mm thick mineral wool. For ease of maintenance and cleaning of the fan, the motor-impeller unit is hinged.
A rubber seal is provided on the fan flanges for a hermetic connection with the air ducts. The mounting frame is made with vibration dampers.
Motor
The fan uses a single-phase (model E) or three-phase motor (model D) with a squirrel-cage rotor and a steel high-performance centrifugal impeller with forward-curved blades. The motor is maintenance-free and equipped with built-in thermal contacts with terminals for connection to an external overheating protection device. Motor winding insulation class F. Protection type IP 54.
Speed regulation
It is allowed to use smooth or step-by-step regulation of fan performance. For this, it is necessary to use a frequency regulator or autotransformer. It is allowed to connect several fans to one regulating device, provided that the total power consumption and operating current do not exceed the nominal parameters of the regulator.
The Vents RS-4,0-PS regulator is suitable for this model (purchased separately).
Installation
The kitchen fan is designed for connection to round air ducts. The fan is mounted on the wall using brackets. Connection to the electrical network is carried out using a terminal box installed on the electric motor. The length of the electric cable must be selected with a margin, taking into account the tilting of the impeller motor unit. It is recommended to install flexible inserts before and after the fan. When installing the fan, it is necessary to provide a straight section of the air duct with a length of at least one diameter of the air duct on the inlet side and at least three diameters on the air outlet side.
