Vents VKPF-4E 600×350 rectangular duct fan
In Stock
| Delivery Method | Delivery Time | Cost | |
|---|---|---|---|
|
Nova poshta
To a branch or by courier
|
1-5 days | According to the carrier's rates |
|
Pickup
From pickup points
|
1 day | Free of charge |
The warranty for electrical components and motors is *90 days upon presentation of a document confirming the purchase of the product.
The warranty for other spare parts is 14 days.
| Manufacturer | Vents |
| Brand | Vents |
| Country of manufacture | Ukraine |
| Rated power, W | 2840 |
| Current consumption, A | 13,9 |
| Supply voltage, V | 400 |
| Power frequency, Hz | 50 |
| Rotation frequency, RPM | 1260 |
| Air consumption, m3/h | 4260 |
| Sound pressure level, dB(A) | 51 |
| Mass, kg | 72 |
| Protection, IP | IPX4 |
| Temperature of the moving air, Degrees Celsius | -25...+60 |
| State | New |
| Warranty period, months | 24 |
The rectangular duct fan Vents VKPFI 4E 600x350 is used for supply and exhaust ventilation systems with reduced noise levels. Models of this VKPFI series have a layer of sound and heat insulation. Designed for connection to rectangular air ducts with a nominal cross-section of 600x350 mm.
Overall dimensions
| Dimensions | B | B1 | B2 | B3 | H | H1 | H2 | H3 | L |
| mm | 600 | 620 | 640 | 670 | 350 | 370 | 390 | 530 | 735 |
Diagrams
Construction
The Vents VKPFI 4E 600x350 fan housing is made of galvanized steel. VKPFI models have a 50 mm thick layer of sound and heat insulation made of mineral wool.
Motor
4- and 6-pole asynchronous motors with an external rotor and an impeller made of galvanized steel with forward-curved blades are used. Fans with this turbine design are characterized by high performance and a relatively large pressure drop. To provide thermal protection against overheating, thermal contacts with terminals for connecting external protection devices are built into the motor winding. The use of rolling bearings in motors ensures a long service life. To achieve accurate characteristics, low noise levels and safe operation of the fan, each turbine undergoes dynamic balancing during assembly. The fan motor has a protection class of IP 44.
Speed regulation
Regulation can be either smooth or stepless, and is carried out using a triac or autotransformer regulator. Several fans can be connected to one regulating device at once, provided that the total power and operating current do not exceed the nominal parameters of the regulator.
Installation
A rectangular duct fan is mounted in a gap in rectangular air ducts and does not require special fastening if the connection is made directly to them. In the case of connection through flexible inserts, fastening to the building structure using supports, suspensions or brackets is required. The fan can be installed in any position, taking into account the direction of air flow (indicated by an arrow on the fan housing). It is also necessary to provide access for fan maintenance. The fan is powered via external terminals. For inspection and maintenance, the fan has a technological cover on the housing.
Installation example
In Stock